How to avoid damage to the stage trusses:
    1 Avoid contact with the stage trusses. The aluminum trusses used in the stage trusses themselves can indicate the formation of protective films, but are not able to block any corrosion, such as long-term exposure to acid-base objects, which would cause corrosion to the shelves and should be avoided.
    2. Stage truss use process to avoid large-scale friction and collision. The most vulnerable to the damage is in the installation, removal, transportation process, these processes, the stage truss more prone to friction and collision, such as the stage truss on the ground when the drag or demolition of the stage truss will hit the ground, these injuries Are difficult to repair, not only affect the appearance of the stage truss, but also directly reduce the life of the stage truss.
    3. Special needs, the stage truss can be special treatment, such as the need for long contact with the water stage truss, can be anodized, increase the stage truss protective layer.
    The maintenance of the stage truss includes routine maintenance and special handling:
    1. The stage trusses and their components should be checked and processed on a regular basis. Check whether the surface of the stage truss has been corroded, such as parts such as pins and R clips are iron profiles, vulnerable to environmental corrosion, found that serious cases should be replaced in a timely manner.
    2. Use a soft cloth to clean the stage trusses, wipe the frequency not too high, the use of the rag can not be rough, or wipe but on the stage truss caused greater damage, do not recommend the use of non-special cleaning agent.
    3. found that the stage truss damage is more serious should be replaced or contact the business inquiries processing methods, do not deal with it, to avoid security risks.
    4. Use professional tools to disassemble the stage truss, load bearing Do not exceed the guidance of the business load.
    Tent use and maintenance knowledge
    1, to avoid sharp scratches tents, affecting the use of results;
    2, after the use of the canopy, all the spare parts should be collected to prepare for reuse;
    3, the handling process should be as lightly as possible to prevent damage to the packaging, so as not to lose accessories;
    4, such as the use of electrical appliances in the canopy, please note that the wire and bracket to have a good insulation, otherwise there will be electric shock hazard;
    5, before the tent, you must carefully survey the terrain, the top of the site do not have rolling stone, rolling wood and weathering rocks;
    6, in the mud or sand on the installation, you can dig around in the drainage ditch to ensure that the ground floor dry;
    7, predict the local wind more than eight or more, please advance to the tent again reinforcement.
    8, tarpaulin must be stored before drying, until it is dry and then folded and stored, if too late to cool the tarpaulin, remember that we can not keep a long stay, so as not to mildew.
    9, depending on the local humidity and climate, regular drying tarpaulin, so as not to breed bacteria, so that tarpaulin rain coating was destroyed.