Tensile Tank Company internal testing

    First, the venue
    A: What is the ground Whether to play expansion screws and steel fiber fixed, the truck can open to the scene unloading, medium-sized canopy and large canopy forklifts and cranes can not enter the field operations.
    B: length and width of the case (weight, then, around the canopy plus 1 meter), the edge of whether there are branches, lampposts, knife flag and wire? How high is the center from the high voltage line? Is the site hardened? Is it inflated or pressed? Can cranes and forklifts work in the field? Can the truck go directly to the scene? On both sides of the canopy (at least one side) to keep the distance of 4-6 meters of the rope (on the top cloth), if the lawn can not play steel Span 15 meters above 5 meters above the need for cranes and forklifts on-site operations, span 15 meters -20 meters, 4 meters high side, you can work manually.
C: the tent around to pay attention to whether there are branches, lights, flag and wire, if the terrain is the best complex sent to the scene seen.
     Second, the glass door, glass wall of the glass wall which faces? Is the glass door open on the front or the mountain wall? Where is the mountain wall? Before the order to ask, the Treasury loaded with different accessories.
     Three, air conditioning, lighting, fan and heater
     How far is the power supply from the tent? What is the total electricity consumption? The main cable more than 100 meters away to the charges, the specific technical problems of air conditioning Jia Jia, lighting power as much as possible to the customer to the power supply received the edge of the tent, a short distance we can solve their own, there are special requirements, to an additional charge , Require all-day maintenance of the additional money.
     Four, tent connection
     Tent and tent between the requirements of the connection, the base of the canopy is required to play the expansion of the screw fixed, the weight box is too large because of the distance can not be connected to the requirements of the rain to the corner slot costs (processing and installation costs) The
     5, on the tip of the tent connection and counterweight (3 * 3,4 * 4,5 * 5) steeple tents if a few connected together a group, just around the weight can be added, the middle of the wire with the pillars Up and down together without adding weight.
    Six, platform
    Ask the ground what is the material, whether the formation of the gap is how much, as what kind of use, and then recommended to the customer, the ground level of the case, if the car as much as possible recommended car with load-bearing platform, not the vehicle to adjust the platform (Thin) instead of wooden platform. If the customer is really asked to use the iron frame platform to agree, but the special requirements with aluminum side to add additional costs, the specific cost if you want to buy materials, you can consult the relevant person in charge of the tent group. And then offer, to reduce the error.
    Seven, tent lighting requirements?
    Can the lamp seat position? Can the tents bear the weight? Some customers asked to hang the sound and the like can not hang?
    8, tents loading problem, which tents what car installed? Assemble the weight and do not install the re-table out of a large number of nine out of cloth, cloth: how to connect tents, surrounded by a few, when the order is to ask the customer, here received orders ready in advance.
    Nine, cloth: how to connect the tents, surrounded by a few, when the order is to ask the customer, here received orders ready in advance.
    Ten, spherical tents parameters

Hexagon tents parameters

尖顶篷房参数

尖顶篷房参数

Steeplehouse parameters

Curved tents parameters

Weight frame size
Large 106 * 80 * 84
Small 50 * 50 * 50
Weight plate size
Large 50 * 50
Small 106 * 80